Key Maker For Toyota ( 4D Chip )

1. Turn the ignition switch “ON” using the key with the original 4D chip.

2. Insert the key programmer into the OBD car diagnostic interface, and the instrument will enter the car auto search procedure with a short “di” sound. 7 seconds later, the key programmer connects with the car computer successfully with the short sound of two or three “di” (two means the car belongs to the second generation and all three means the third generation); After 20 seconds, the instrument will enter the “key learning procedure” with a long “. Di” sound.

3. Reading the key code

3.1. Match two main keys and one subsidiary key on the IMMO computer (Attention: There must be two new main keys and one subsidiary key)

A) in the lock insert the first new ignition key and wait 5 seconds, and then the SEC light will turn on. turn on. (do not turn on the input when the key is inserted).

B) Insert another main key into the ignition lock and wait 5 seconds, and then the SEC light turns on. (do not turn on the input when the key is inserted).

C) Insert the subsidiary key into the ignition lock and then the SEC light turns off. (Do not turn on the input when the key is inserted.)

3.2. Just match one or two main keys with immo computer (Close matching mode manually after match finish).

A) Insert the first main key and wait 5 seconds, the SEC light turns on. (Do not turn on the input when the key is inserted.)

B) Insert the second main key and wait 5 seconds, the SEC light turns on. (Do not turn on the input when the key is inserted.)

C) Insert the first finished Key, turn the ignition on quickly for 5 times, and then pull out.

Smart keys

1. Safe and efficient: It only takes 20 seconds to add a key

2. It is safe for the security alarm system

3. Supports all kinds of Toyta and Lexus smart key systems: Supports K-line and CAN-BUS protocols

4. It is the safest and fastest key programming device for to-yota and le-xus series so far.

5. Supports all lost keys

Using the smart key

1. Add the other keys to the main key.

1.1 .. Insert the key programmer into the OBD car diagnostic interface, and the instrument will enter the car auto search procedure with a short “di” sound.

1,2. Press the start button twice. After 7 seconds the vehicle will connect the devices successfully, and the equipment will send a “di” sound with 4-5 times, (4 sounds means that the system is the 4th period, 5 sounds means that the system is the 5th Period); After waiting 30 seconds, the equipment will send out a long probe of “di”, which means the car goes into “learning key state”.

2. When all keys are lost or we only have the key attached, we need to initialize it :.

2.1. Long press the LED button on the equipment, and insert it into the OBD, and release the button after the sound of “di” twice, the device enters the vehicle search state at this time:

2.2 .. press the start button twice. After 7 seconds the vehicle will connect the devices successfully, and the equipment will send a “di” sound with 4-5 times, (4 sounds means that the system is the 4th period, 5 sounds means that the system is the 5th Period); After 5 seconds the SEC lights will turn off; After waiting 10-16 minutes the equipment will send out a long “say” sound, and the SEC lights will flash, that means the car enters “learning key state.”

3. Learning the smart key for computer anti-theft:

When the smart keys back signal near the home button, you will hear 2 sounds of “di” “di” at this time, the SEC lights will flash twice; After learning all the smart keys, you have to wait 30 seconds until the SEC lights flash, and the system will close the learning pattern automatically.